Phuc Mobile
4 weeks
Repair Samsung J2 J200 Charging Error — Charging Problem Troubleshooting
Error from the charging cable or adapter
Damaged charging cable:
The charging cable may have an internal break, loose connectors, or rust.
Solution: Test the cable with another device or use a new cable.
Non-functioning adapter:
The adapter may be faulty due to damaged internal components or incompatibility with Samsung J2 J200.
Solution: Replace the adapter and make sure it meets the correct specifications for Samsung J2 J200.
It’s recommended to bring Samsung J2 J200 to a repair shop to check whether the problem is the cable or the adapter.
Error from the charging port on Samsung J2 J200
Dust or debris in the charging port:
Dust can block the connection between the charging cable and Samsung J2 J200.
Solution: Carefully clean the charging port using a toothpick or compressed air.
Damaged charging port:
The port may be loose, have broken connectors, or suffer from internal circuit damage.
Solution: Bring Samsung J2 J200 to a repair center to replace the charging port.
Samsung J2 J200 battery issues
Worn-out or faulty battery:
The battery can no longer hold a charge or charges very slowly.
Solution: Replace the battery at a reputable service center.
Overheating device:
If Samsung J2 J200 gets too hot, the system will stop charging to protect the battery.
Solution: Let Samsung J2 J200 cool down before charging again.
Battery nearly full:
When the battery reaches 80% or higher, Samsung J2 J200 may activate battery protection mode, slowing down charging speed.
Poor battery contact:
Due to drops or long-term use, the battery’s connection with Samsung J2 J200 may weaken.
Software or operating system issues on Samsung J2 J200
Software errors:
A faulty operating system or background apps may cause conflicts that stop Samsung J2 J200 from charging.
Solution: Restart Samsung J2 J200 or update the software.
Incompatible charging configuration:
Some devices won’t charge from non-certified or unofficial power sources.
Solution: Use an official or certified charging accessory.
Unstable power source
Non-functioning outlet or weak power supply:
If the power source is unstable, Samsung J2 J200 may not charge.
Solution: Check the outlet or try charging in a different location.
Charging management circuit issues on Samsung J2 J200
Faulty power IC:
The power management IC on the motherboard may be damaged, preventing Samsung J2 J200 from receiving power.
Solution: Replace the power IC at a professional repair center.
This is a complex technical problem that’s hard to diagnose without disassembling the device. If the mainboard is damaged, the repair may take longer and be more difficult.
Basic troubleshooting steps for Samsung J2 J200
- Try a different charging cable and adapter.
- Check the power source and outlet.
- Clean the charging port.
- Restart Samsung J2 J200 or reset to factory settings.
If these solutions don’t work, take Samsung J2 J200 to a repair center for further inspection.
You can try these methods to identify and fix the issue. If you find it difficult, consult a professional technician to ensure safety.
Advanced solutions for repair technicians
Below are advanced methods for repairing the mainboard and sub-board, intended for professional repair technicians only.
