Samsung M23 5g SM-236 TestPoint Connection Diagram – Analyze eMMC & UFS on PCB

What is TestPoint? Applications in Samsung M23 5g SM-236 Repair

TestPoints are small contact pads or signal points on a device's motherboard, used to access specific data or power lines directly. For technicians working on Samsung M23 5g SM-236, TestPoints allow for:

• Entering download or EDL mode (Emergency Download)
• Reading/writing data from eMMC or UFS storage chips
• Bypassing security to recover bricked or locked devices

Understanding eMMC vs. UFS in Samsung M23 5g SM-236

Depending on the version or hardware configuration, Samsung M23 5g SM-236 may use either eMMC or UFS memory. Here's a quick comparison between the two types:

TestPoint Diagram for Samsung M23 5g SM-236

The image below shows the exact TestPoint layout on the motherboard of Samsung M23 5g SM-236. This helps technicians connect the device to tools like UFI, EasyJTAG, or Medusa for data access or recovery:

Note: Diagrams may vary slightly depending on the specific hardware revision. Always compare with the actual PCB before connecting.

Basic Steps to Use TestPoint

1. Identify the TestPoint location using the diagram.
2. Use a tweezer or jumper wire to short the TestPoint with GND or the required power point.
3. Connect the device to your box (UFI, EasyJTAG, etc.).
4. Launch the software, detect the eMMC/UFS chip, and perform tasks like backup, erase, or write firmware.

Technical Precautions

• Always ensure stable power supply to avoid short circuits.
• Do not hold the TestPoint connection too long – trigger it only when needed.
• Always backup data before performing any operations to prevent permanent loss.

Conclusion

Understanding TestPoint mapping and the differences between eMMC and UFS is critical when repairing boot errors or data-related faults on Samsung M23 5g SM-236. This guide provides a targeted reference for technicians working with this specific model.

If you need more schematics or repair diagrams for other devices, feel free to contact us or explore our regularly updated technical library.